Architectural drawings

Architectural drawings describe the building the owner asked for: its size, shape, rooms, materials, and how people move through it. In professional practice this is the construction document phase the set a contractor prices and builds from, as described in the AIA’s outline of basic services.

Francis D.K. Ching’s Building Construction Illustrated treats these sheets as the language of the building: plans cut horizontally, sections cut vertically, elevations show the outside face, and details zoom in where materials meet.

Sheets in your package

  1. 01

    Cover sheet / drawing index

    What it is
    The index sheet: project name, sheet list, revision dates, and drawing symbols used in the set.
    Why you need it
    Lets reviewers and contractors find the right sheet quickly and track which version is permit-approved.
  2. 02

    Location map

    What it is
    A small map showing the plot within the street or neighbourhood.
    Why you need it
    Authorities confirm the project address and access roads before studying the site plan.
  3. 03

    Site plan

    What it is
    Top view of the plot: building footprint, setbacks, parking, paths, and levels relative to boundaries.
    Why you need it
    Defines legal buildable area, drainage direction, and fire access common permit rejection point if missing.
  4. 04

    Floor plans

    What it is
    Horizontal cuts through each level showing walls, doors, windows, stairs, and room names with dimensions.
    Why you need it
    This is the sheet most owners read; builders use it to set out walls and openings on site.
  5. 05

    Roof plan

    What it is
    Plan of the roof surface: slopes, ridges, gutters, and equipment zones.
    Why you need it
    Roofers and structural engineers align drainage, loads from solar or tanks, and safety walkways.
  6. 06

    Reflected ceiling plans

    What it is
    Ceiling plan viewed from above (mirrored): lights, AC grilles, sprinklers, and ceiling heights.
    Why you need it
    Coordinates MEP penetrations before gypsum is fixed; avoids costly rework in living areas.
  7. 07

    Building elevations

    What it is
    Outside faces of the building: heights, materials, windows, and ground levels on each side.
    Why you need it
    Shows neighbours and planners what the finished house will look like on the street.
  8. 08

    Building sections

    What it is
    Vertical cuts through the whole building showing floor-to-floor heights, roof, and relationship to ground.
    Why you need it
    Proves headroom, stair clearance, and how the structure spans required for permit height checks.
  9. 09

    Wall sections

    What it is
    Zoomed vertical cuts through typical walls: layers from finish to structure, insulation, damp proofing.
    Why you need it
    Builders follow these to build walls that shed water and meet energy or acoustic expectations.
  10. 10

    Door and window schedules

    What it is
    Tables listing each door and window type, size, material, hardware, and quantity.
    Why you need it
    Joiners and aluminium shops quote from schedules; permit offices verify fire-rated doors where required.
  11. 11

    Stair and ramp details

    What it is
    Enlarged plans and sections for stairs and ramps: tread, riser, handrails, landing sizes.
    Why you need it
    Stairs are a frequent site dispute; details enforce safe rise/run and wheelchair ramps where code applies.
  12. 12

    Interior layouts and elevations

    What it is
    Room layouts with fixed joinery: kitchens, wardrobes, bathroom fixtures shown in plan and elevation.
    Why you need it
    Cabinet makers and tilers know exact locations before finishes are ordered.
  13. 13

    Finish plans and schedules

    What it is
    Floor and wall finish codes by room, plus material schedules (tile, paint, stone).
    Why you need it
    Controls cost and appearance; avoids guessing which rooms get which tile on site.
  14. 14

    Landscape and external works drawings

    What it is
    External works: planting, fences, paving, retaining edges, and sometimes pool or septic location.
    Why you need it
    Shows how rain leaves paved areas and how the plot meets the street often reviewed with the site plan.
  15. 15

    Accessibility and fire escape plans

    What it is
    Escape routes, travel distances, fire doors, and accessibility clearances.
    Why you need it
    Required for commercial and multi-unit projects; good practice even for single homes with staff quarters.
  16. 16

    Construction details

    What it is
    Large-scale drawings at eaves, balconies, waterproofing, and material junctions.
    Why you need it
    Where buildings leak or crack is usually at details; these sheets tell masons how to flash and seal.

Further reading
Summarized from common practice texts: AIA basic services, Ching’s *Building Construction Illustrated*, and typical East African building-control submission checklists.

Plan added to cart successfully.